Epson PowerLite 61p User Manual page 84

Solving Problems
84
Nothing appears on the external monitor.
Make sure the VGA computer cable is connected to your
computer's video port and the projector's
Computer1/Component Video1
connected the computer cable to the projector's
Computer2/Component Video2
Make sure the cable from your monitor is connected to the
projector's
Monitor Out
You see a blue screen with the message
Make sure the cables are connected correctly, as described in
Chapter 1.
Make sure the power to your computer or video source is
turned on.
If you've connected a computer and one or more video sources,
you may need to press the
projector or the
Comp 1
the remote control to select the correct source. Allow a few
seconds for the projector to sync up after pressing the button.
If you've connected a laptop computer, make sure it's set to
display on an external monitor. See page 33.
If you're using a PC laptop:
Hold down the
Fn
display on an external monitor. It may have an icon such as
, or it may be labelled
the projector to sync up after pressing it. Check your laptop's
manual or online help for details.
On most systems, the
between the LCD screen and the projector, or display on both at
the same time.
port. It will not work if you
port.
port.
No Signal
Source Search
, ,
Comp 2 S-video
key and press the function key that lets you
. Allow a few seconds for
CRT/LCD
or
CRT/LCD
displayed.
button on the
, or button on
Video
key lets you toggle