Epson PowerLite 61p User Manual page 56

note
If you have repositioned the
image but then change your
mind, you can press the
button on the remote
Auto
control to restore the default
settings.
Fine-tuning the Projector
56
3. Press . Then use the
Enter
arrow buttons) and the
following options:
(computer images)
Auto Setup
Leave this setting
image. Turn it off if you want to save adjustments you have
made to the video settings.
(computer images)
Tracking
Removes unwanted vertical lines from a computer image by
matching the projector's internal clock to various computer
signals. See page 88 for more information about adjusting the
tracking.
(computer images)
Sync
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
See page 88 for more information about adjusting the sync
setting.
Position
Use the pointer button or arrow buttons to move the
image on the screen left, right, up, or down.
Computer 1 Input
Selects the signal from equipment connected to the
Computer1/Component Video1
look wrong, try changing this setting from
following:
RGB
Component Video
Computer 2 Input
Selects the signal from equipment connected to the
Computer2/Component Video2
look wrong, try changing this setting from
following:
RGB
Component Video
pointer button (or up and down
button to select any of the
Enter
to automatically optimize the computer
ON
port. If your image colors
for computer or RGB video sources, or
for component video sources.
port. If your image colors
for computer or RGB video sources, or
for component video sources.
to one of the
Auto
to one of the
Auto