Epson PowerLite 61p User Manual page 31

3. Connect the other end to an electrical outlet.
The power light on top of the projector turns orange, indicating
that the projector is receiving power but not yet turned on. Wait
until the light stops flashing but stays orange.
4. Turn on your computer or video source if you have not already.
5. Press the P
Power
(You can also press the P
Projector
The projector beeps and the power light flashes green as the
projector warms up. The projector lamp comes on in about 45
seconds and the power light stays green.
If you're using a computer, you should see your computer
display projected after a moment or two. If not, you need to
select the image source. See page 32.
(Windows only: If you see a message saying that it has found
a plug-and-play monitor, click
If you're projecting a video, press the
on the projector or remote control to switch to your video
source. Then press the
other device.
If you are prompted to enter a password, see page 66.
button on top of the projector to turn it on.
button on the remote control.)
Power
Power button
Cancel
Source Search
button on your DVD player or
Play
Remote control
.)
button
note
If you are using the remote
control for the first time, be
sure to insert the batteries as
described on the Quick
Setup poster.
warning
Never look into the lens when
the lamp is on. This can
damage your eyes, and is
especially dangerous for
children.
Projecting
31