Inserting A Cd-R/Rw; Writing All Photos To A Cd-R/Rw - Epson LivingStation LS47P2 User Manual

Inserting a CD-R/RW

1 Press the eject button on the drive to open the tray.
2 Place a new, blank CD-R/RW disc on the tray with the label side facing up. Make sure the
disc lays flat in the tray.
3
Press the eject button again to close the tray.

Writing All Photos to a CD-R/RW

1 Press the 3 button. (Or press Menu, press Select d to highlight CD-R/RW Writer,
and press Enter.) The CD-R/RW Writer menu opens.
2 To write all of the photos on your digital photo card to the CD, press Enter to select
Write to CD-R/RW.
3 You see a confirmation message. Select Yes and press Enter. (To cancel, select No and
press Enter.)
Caution
Always use the eject
button to open and close
the tray. Pushing in the tray
may damage the drive
and your disc.
Caution
Don't remove a card from
the slot while you're writing
to CD-R/RW or you may
damage the card or your
CD-R/RW drive. Wait until
writing is finished and the
Card light shines green (or
is off) before removing the
card.
Note
The photo viewer cannot
display, enlarge, or print TIF
images. You see only the
screens for TIF images. You
can write TIF images to a
CD-R/RW and view them
on your computer,
however.
Viewing, Printing, and Saving Photos
icon on the viewer
93