Tv Reception Or Operation Problems; Remote Control Problems - Epson LivingStation LS47P2 User Manual

Light Equipment
switch
Power
TV STB1 STB2 VCR DVD
REC PAUSE SKIP
STOP REW PLAY FF
Photo View Freeze Print
Menu Exit
Select
Photo
Zoom
Prev. Next Rotate
Enter
Select
1 2 3
4 5 6
7 8 9
Ch
0
Enter
TV/Video Mute Favorite
Vol. Ch
Aspect POP Swap Sleep
MTS Guide Ch Prev. Ch Display
Info
114
Solving Problems

TV Reception or Operation Problems

Problem
TV reception is poor.
The TV channels can't be
changed or selected.
You can't receive a digital
broadcast.

Remote Control Problems

Problem
The remote control doesn't work.
Solution
Check your antenna, cable, or digital or satellite receiver
connections. See page 16 for details.
Weather conditions and interference from other nearby
equipment may be affecting the picture quality. Turn off or
relocate equipment such as hair dryers or microwave ovens, if
possible.
When the TV is warming up or cooling down (the
flashing), you can't use the buttons. When the
lit green or orange, the buttons are operable.
You may have locked access to certain channels. Press the
Menu
button on the TV panel or remote control. Check the
Channel Lock
settings on the Lock menu as described on
page 59.
You may have marked the channel to be skipped. Press the
Menu
button on the TV panel or remote control. Check the
Manual Program
settings on the Channel menu as described
on page 49.
If your cable system added channels and you can't receive
them, you need to run the Auto Program utility to add them to
your TV's list of receivable channels. Press the
the TV panel or remote control. Select the
on the Channel menu as described on page 47.
You must connect the TV to a digital TV receiver to receive digital
broadcasts.
Solution
If you have problems with the remote control, press any button
on the remote to check if the light on the top comes on.
If the light comes on, move closer to the TV when you use the
remote control and aim it at a more direct angle. Make sure the
room lighting is not too bright and not shining directly on the
remote control or the TV receiver window. Also clean the
transmitter area on the top of the remote and the receiver
window on the TV to see if that helps.
If the light doesn't come on, make sure the batteries are inserted
correctly and are working. If necessary, replace the batteries.
Make sure the equipment switch at the top of the remote control
is set to the device you're trying to control.
If you still have problems with the remote control, try the other
suggestions on page 34.
Power
light is
Power
light stays
Menu
button on
Auto Program
setting