Epson Livingstation LS47P2 Quick Setup Manual

HDTV LCD Projection Television

Quick Setup

Quick Setup
After unpacking your TV and its accessories, follow the steps here to get it set up for viewing High Definition digital
TV broadcasts.
You'll also find quick instructions for using your TV's Photo on Demand
your digital photos.
Make sure these items are included:
• TV
• Set-top shelf with screws
• Remote control with 2 AA batteries
• Package of paper (20 sheets)
• Ink cassette
• CD-R/RW drive with USB cable and power cable
Write down the TV's serial number on the line below. It is located on a sticker on the back left side of the TV.
Serial number __________________________________________

Lifting the TV

When lifting the TV, have two people grasp it as shown, using the two
handles in back and the top of the frame in front.
Warning
The TV is very heavy. Two people are required to lift or move the TV to avoid
injury. Never move the TV and its stand together or the TV may fall and cause
injury or be damaged.
Installing the Set-Top Shelf
The set-top shelf provides a convenient support for a center surround sound speaker or your HDTV tuner on top of
the TV. The shelf can hold up to 11 lb (5 kg).
Caution
Don't fold the shelf backward on its hinge or it may break.
1 Fold the shelf into an upside-down L-shape with the shorter end on top.
2 Align the holes in the shelf with the holes on the back of the TV.
3
Using a Phillips screwdriver, secure the shelf to the TV with the four screws that came with it.
Tighten the screws.
Selecting a Location and TV Support
Select a suitable location for your TV and follow all of its safety instructions
to ensure it operates safely and effectively, as described in the User's Guide.
You can use an optional Epson TV stand to support your TV.
Order part number V12H003R03 (for the LS47P2) or
V12H003R02 (for the LS57P2) from your dealer.
If you use your own stand, make sure it can securely support the TV as follows:
Specification
Width of the base
(minimum)
Depth of the base
(minimum)
Weight capacity
(minimum)
Place the stand in a location that allows you access to the back of the TV and provides at least
12 inches (30 cm) of room for ventilation at the sides.
You may want to secure the TV to a wall or other support so it stays upright on its stand during
an earthquake or other situation. See your User's Guide for details.
LS47P2
47 inches (119 cm)
16 inches (41 cm)
331 lb (150 kg)
™ system for viewing, printing, and storing
• HDTV tuner, remote control, and User's Guide
(not available in all locations)
• Component video and audio cables
(for connecting tuner; not available in all locations)
• Documentation kit
LS57P2
56 inches (142 cm)
18 inches (46 cm)
331 lb (150 kg)
LS47P2 • LS57P2