Select a suitable location for your TV and follow all of its safety instructions to ensure it operates safely and effectively, as described in the User’s Guide. You can use an optional EPSON TV stand to support your TV. Order part number LS47STD (for the LS47P1) or LS57STD (for the LS57P1) from your dealer.
Here are instructions for connecting a digital TV (HDTV) receiver, DVD player, and external CD-R/RW drive to your TV. For instructions on connecting other equipment, see your User’s Guide. Make sure your TV is unplugged before connecting equipment to it. Before connecting a digital TV receiver to the TV, be sure to read any instructions that came with the receiver.
Press in on the top of the battery cover on the back of the remote control. Then slide the cover down and off the remote. Insert the batteries as shown here, making sure the + and – ends face the right way. Then push them down flat. Place the cover into the grooves and slide the cover all the way up until it clicks into place.
Open the paper cassette lid. You can load up to 20 sheets of paper. Position the paper with the shiny side face up, with the wide bordered edge facing the hinge of the cassette, and the narrow bordered end facing the open end of the cassette. Don’t remove the perforated borders on the paper before you print.
Your TV’s Photo on Demand system lets you view photos on digital photo cards (also called memory cards) or CD-R/RW discs, print the photos on its built-in printer, and store them on CDs. Follow the quick steps below or the expanded instructions in your User’s Guide.
EPSON Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral. EPSON is a registered trademark and Livingstation is a trademark of SEIKO EPSON CORPORATION. PrivateLine is a service mark and Photo on Demand is a trademark of Epson America, Inc.