Skipping Unused Input Sources - Epson LivingStation LS47P2 User Manual

5 Press Prev < or Next > to select English, Français (French), or Español (Spanish).
6 Press Exit to select another menu or press Menu to exit the menu system.

Skipping Unused Input Sources

As you switch between input sources using the TV/Video button, the TV goes to sources to
which you've connected equipment. However, the TV goes to the DVI and PC sources even if
you aren't using them, unless you turn the ports off.
To turn off the DVI and PC ports when you're not using them (so you don't have to cycle
through them with the TV/Video button), follow these steps:
1 Press the Menu button on the TV panel or the remote control.
2 To highlight the Setting menu tab, press Next >.
3 Press Enter. The Auto Aspect setting is highlighted.
4 Press Select d to highlight Use of DVI Input.
Use of DVI Input
and
Use of PC Input
settings
5 Press Prev. < or Next > to turn the setting OFF.
6 Repeat step 4 and 5 for the Use of PC Input setting.
7 Press Menu to exit the menus.
Note
You can use the buttons on
the TV or the remote for all
menu operations.
43
Setting Up the TV