Advertisement
Setting up an earlier version (8.0, 8.1, 8.2) the LaserWriter 8.x driver
1.
Follow the instructions in
printer description files. Select one of the standard options to
automatically install all of the printer's software, or select the
PPD files for drivers and applications option.
2.
Open the Chooser.
3.
Select the LaserWriter 8 driver icon.
4.
Select your printer from the list.
5.
Still in the Chooser, click the Setup button to see a list of options.
6.
In the dialog box that appears, click the More Choices button to
see the full range of options.
Note
Do not use the Auto Setup button; errors can occur with the
PPD files. Continue with this procedure to properly set up the
driver.
7.
Click the Printer Info button, then click the Update info button in
the next dialog box.
8.
Record the information on PostScript Version and Total Memory
Installed; you will need this information later. Click OK.
Using the Installer
to install the PPD
Advertisement
