On-Off Switch - Craftsman 143.213150 Owner's Manual

27. DRILL "ON-OFF" SWITCH . .. Has locking fea-
ture, THIS FEATURE IS INTENDED TO HELP
PREVENT UNAUTHORIZED AND POSSIBLE
HAZARDOUS USE BY CHILDREN AND
OTHERS.
Insert KEY into switch,
NOTE: Key is made of yellow plastic.
To turn drill ON.. ,
Insert finger under switch lever and pull.
.yd
II
i
\
M,.
oO_
To turn drill OFF... Push lever in.
In an emergency; ... the drill bit BINDS... STALLS
• . . STOPS . . . or tends to tear the workpiece loose
• • . you can QUICKLY turn the drill OFF by hitting the
switch with the palm of your hand.
/
To lock switch in OFF position.., hold switch IN with
one hand... REMOVE key with other hand.
WARNING: FOR YOUR OWN SAFETY, ALWAYS
LOCK THE SWITCH "OFF" WHEN DRILL PRESS IS
NOT IN USE . .. REMOVE KEY AND KEEP IT IN A
SAFE PLACE . . . ALSO . . . IN THE EVENT OF A
POWER FAILURE (ALL OF YOUR LIGHTS GO OUT)
OR BLOWN FUSE OR TRIPPED CIRCUIT
BREAKER, TURN SWITCH OFF... LOCK iT AND
REMOVE THE KEY. THIS WILL PREVENT THE
DRILL PRESS FROM STARTING UP AGAIN WHEN
THE POWER COMES BACK ON.
19