Tips That Apply To All Stocks; Bond (56 To 158 Gsm) - Xerox Nuvera Digital Production System Paper Manual

Tips that apply to all stocks

Selection tips •
•
Storage tips Refer to the Chapter 2,
moisture in paper.
Usage tips •
•
•
•
•
•

Bond (56 to 158 gsm)

Description Bond papers are commonly used for letterheads, stationary, and business
forms. Properties include whiteness, uniform finish, durability, and good
formation. Bond papers accept ink readily and are easily erased.
Selection tips Select a smooth paper with good formation for best image quality
Storage tips Follow general guidelines in Chapter 2,
Usage tips Follow general usage tips in
X er o x N u v er a P a p er G u id e
Table 3-1. All stocks
Before ordering stock, check the latest Xerox Nuvera Media
Compatibility Guide.
If you wish to run a paper that has not been recommended by Xerox,
test a small quantity before making a large purchase.
Managing your paper
To prevent leaving handling dents on sheets, handle stocks gently when
loading feeder trays.
To prevent damaging large size papers, handle partial reams only.
Stock that is cut unevenly may require fanning to improve performance.
If multifeeds occur, leave the stock in the tray and fan the lead and trail
edges of the stack.
– Gently hold one side (lead or trail) of the stack to keep it from
moving.
– Gently lift the top four inches (10 centimeters) of the opposite side of
the stack, then allow the sheets to gently fan back down into the tray.
If the paper packaging does not indicate a paper loading direction, load
paper with the curl side down.
If jammed sheets exhibit damaged or folded lead edges, check the
unloaded (stored) paper from the same shipment to see if the paper is
defective.
Table 3-2. Bond (56 to 158 gsm)
supply, section on controlling
Managing your paper supply.
Table 3-1.
Ti ps by s t oc k ty p e
3-3