PRODUCT
SPECiFiCATiONS
Collet .......................................................
1/4 in. Hex Shank
Motor .................................................................
4.8 Volt DC
Switch ...........................................
Single Speed/Reversible
No Load Speed .....................................................
330/min.
Clutch ..............................................................
12 Positions
Torque .....................................................
Maximum 50 in.lb.
Charger Input ....................................
120 V, 60 Hz, AC only
Charge Rate .........................................................
3-6 hours
COLLET
SWITCH
CHARGER
KNOW
YOUR SCREWDRIVER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
SWITCH
The screwdriver is equipped with a rocker type switch
which turns the screwdriver ON and OFF. This switch
also controls the forward and reverse feature.
Fig. 1
TORQUE
ADJUSTMENT
RiNG
The screwdriver has a 12-position clutch. The torque ad-
justment ring can be turned to select the right amount of
torque for the application.