Craftsman 113.24140 Owner's Manual page 14

basic saw operation ALwAvs,op ,
LONO WORKP[ECES
WORK SUPPORT
Use a "saw horse" ... and a piece of plywood.
//
When "WIDTH OF RIP" is 6 inches and WIDER use your
RIGHT hand to feed the workpiece until it is clear of the
table.
Use LEFT hand ONLY to guide the workpiece ... do not
FEED the workpiece with the left hand.
When "WIDTH of RIP" is 2 inches to 6 inches wide USE
THE PUSH STICK to feed the work.
When WIDTH of RIP is NARROWER than 2 inches, the
push stick CANNOT be used because the guard will
INTERFERE ... USE the AUXILIARY FENCE/PUSH
BLOCK.
14