Craftsman 113.23800 Owner's Manual page 11

2. To turn Lathe ON... INSERT finger under switch lever
and pull END of switch out.
f
3. To turn Lathe OFF... PUSH lever in.
Never heave the Lathe unattended until it has come to a
complete stop and you have removed the switch key.
Do not cycle the motor switch on and off rapidly, as
this may cause the faceplate or sanding disc to loosen.
In the event this should ever occur, stand clear of the
face plate or sanding disc until it has come to a complete
stop., . retighten it.
11