Craftsman 113.23800 Owner's Manual page 17

11. Adjust the tool rest approximately 1/8" away from
the corners _f the wood and 1/8" above the center line.
Note the angled position of the tool rest base.
Lock the tool rest base and the tool rest.
TOOL REST
1/8"
WOOD
Look at the speed chart, Notice that e 2" square
turning up to 18" long should run at 875 R.P,M. for
"roughing", Move the V-belt on the pulleys to the
slowest speed.
Rotate the wood by hand to make sure that the corners
do not strike the tool rest.
17