Power Steering Fluid Reservoir - Chery Karry series User Manual

Please DO NOT use coolants
with different colors and
specifications.
only prevents the engine from being
frozen in winter, but also provides the
anti-corrosion protection year around. The
modern engines operate at the extremely
high temperature, and the coolant with
poor quality cannot provide
protection to an engine.
Therefore, please use the coolant that
meets with the Chery's specifications. DO
NOT use tap water to substitute the
coolant.
Refer to the chapter "Capacity and
Specification" for the capacity.
Refill the coolant
1. Unscrew the reservoir cap, refill the
coolant up to the MAX mark, and operate
the engine to make the temperature of
water approx. 90 . DO NOT unscrew the ℃
reservoir cap, because there are some
gases draining from the water passage. In
this case, the level of fluid in the reservoir
will drop down;
2. Turn off the engine, refill the coolant
into the reservoir and repeat the process
above until the level of reservoir doesn't
drop down any more, and then screw on
the reservoir cap.
Battery
proper
Battery only requires little maintenance.
The level of fluid will be checked during
the routine maintenance and examination.
Your vehicle
maintenance-free battery. Using other
model of batteries is not recommended.
The current and capacity of a new battery
must be the same as that of used battery
and conform to the Chery's specification.
Please contact and consult the Chery's
special service station for proper battery
specifications.
is equipped with a
Repair & Maintenance

Power steering fluid reservoir

When the engine is in the cold state, the
level of fluid shall reach the MAX mark.
Power steering fluid that meets with the
Chery's specification shall be refilled if
the fluid level is below the MIN mark.
93