Table of Contents
Advertisement
Under sideburner shelf, attach sideburner ignitor wire to electrode, shown A. Place sideburner grate onto sideburner shelf,
shown B.
Inside of cart, insert rear tab (without hole) of heat shield into left slot on bottom of upper back panel. Insert rear tabs
(without hole) of left and right grease tray rails into slots beneath grease tray opening in upper back panel, shown A. Attach
front tabs of heat shield under front brace and attach right and left rails under front brace with three #8x3/8" self-tapping
screws, shown B.
Grease tray opening
24
Advertisement
Table of Contents
