Insert front b race under c ontrol panel andbetween cartside panels. Make sure door h inge pinholes a reonthetopside and
facing thefront. S ecure u sing two1/4-20x1½"
screws, 7mm lock washers, and 7mm flatwashers oneach side.
NOTE:
MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN
ASSEMBLED TO CART.
Door Hinge Pin Hole
i.....
7mm Flat Washer
7mm Lock Washer
so
On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel using
two 1/4-20x1½" screw, 7mm lock washer, and 7mm flat washer on each side.
1/4-20xl ½" Screw
\
7mm Lock Washer
7mm Flat Washer
Upper Back Panel
2O