Advertisement
Pull out the two knobs from control panel. Insert temperature gauge stem into the bigger hole above knob bezel, shown A.
Make sure the gauge is pushed in as far as it will go, then push the gauge downward until it clips into the panel, shown B/C.
Re-install the two knobs.
Temperature gauge stem
Temp
Knob
Attach right side fascia to right side shelf using two 1/4-20x11/2 ' ' screws, 7ram lock washers and 7ram flat washers.
Only right side shelf shown for assembly, install left side shelf with fascia in the same way.
7ram flat washer
7ram lock washer
screw
ght side shelf
Right sidefascia
Advertisement
