Changing Tv/Vcr/Aux/Tape Settings - Bose LIFESTYLE DVD Home Entertainment Systems Operating Manual

Changing TV/VCR/AUX/TAPE settings
To change the settings for the TV, VCR, AUX, or TAPE source, press the Settings button while
one of these sources is selected. Figure 9 shows you a map of the settings menu when one of
these sources is selected.
Figure 9
The TV/ VCR / AUX /
TAPE settings menu
o oc
_oo
_@,@G
(0®®
®00
®0®
0"5
@ @
® 60@
_[ Settings (Source) ]
®
Menu Item What each setting does
Sleep Timer:
TV, VCR, AUX or
TAPE Status:
Audio Setup
Analog Input:
Digital Input:
System Setup
Settings
Off
mm:ss
-6/-3/0/3/6
-6/-3/0/3/6
Timer not active.
Turns system off after set time expires (10 to 90 minutes).
Displays information about the TV / VCR / AUX / TAPE
source.
See "Making audio adjustments" on page 28.
Adjusts the TV / VCR / AUX / TAPE analog audio level. Use
this adjustment if an external source sounds much louder or
softer than the other sources.
Adjusts the TV / VCR / AUX / TAPE digital audio level. Use
this adjustment if an external source sounds much louder or
softer than the other sources.
See "Changing the system setup" on page 30.
AM259 776_O1_V.pdf October 30, 2001 27