Changing Tv/Vcr/Aux/Tape Settings - Bose LS28IIIBLK Operating Manual

Changing System Settings

Changing TV/VCR/AUX/TAPE settings

Figure 10
TV / VCR / AUX /
The
TAPE
settings menu
28
To change the settings for the TV, VCR, AUX, or TAPE source, press the Settings button while
one of these sources is selected. Figure 10 shows you a map of the settings menu when one
of these sources is selected.
Settings (Source)
Settings
On Mute
Mute
Off
All
SOURCE / INPUT
CD/DVD FM/AM Tape
Sleep Timer
TV Input TV VCR AUX
Power Power Power
MENU / NAVIGATION
DVD TV/VCR/AUX/TAPE Status
Guide Exit Settings
Menu
Tune
Seek Enter
Audio Setup
Channel
Chapter
Volume
Preset
Track
1 2 3
Analog Input
4 5 6
7 8 9
Previous
0
Digital Input
PLAYBACK
Stop Pause Play
Shuffle Repeat
System Setup
AUDIO
Speakers Surround
2-3-5 - +
Menu Item Settings
Sleep Timer: Off
mm:ss
TV, VCR, AUX or
TAPE Status:
Audio Setup
Analog Input: -6/-3/0/3/6 Adjusts the TV / VCR / AUX / TAPE analog audio level. Use
Digital Input: -6/-3/0/3/6 Adjusts the TV / VCR / AUX / TAPE digital audio level. Use
System Setup
AM259776_02_V.pdf • April 23, 2002
What each setting does
Timer not active.
Turns system off after set time expires (10 to 90 minutes).
Displays information about the TV / VCR / AUX / TAPE
source.
See "Making audio adjustments" on page 29.
this adjustment if an external analog source sounds much
louder or softer than the other sources.
this adjustment if an external digital source sounds much
louder or softer than the other sources.
See "Changing the system setup" on page 32.