Xerox DocuPrint 92C IPS Troubleshooting Manual page 17

XEROX DOCUPRINT 92C IPS TROUBLESHOOTING GUIDE
4. Press the green lever to unlatch the paper feeder assembly.
5. Remove and discard any partially fed paper. Make sure the
paper supply is neatly stacked and the stack is not higher than
the MAX line on the length guide. Make sure the length guide
is firmly touching the back edge of the stack.
6. Latch the paper feeder assembly by pressing the green dot until
the assembly clicks into place.
7. Slide the tray back into the printer until the tray latches and
press the Continue button to resume printing.
8. Discard any pages sent to the sample tray or unused stacker
tray when the paper jam was detected.
CLEARING PAPER MISFEEDS AND JAMS
2-3