Inserting A Memory Card; Removing Memory Cards; Connecting A Digital Camera Or External Storage Device - Epson Stylus Photo R340 Manual

Inserting a Memory Card

1. Press the P power button to turn on your Epson Stylus
Photo R340.
2. Open the memory card door.
3. Insert the memory card into one of the three slots, as shown
below.
CompactFlash or Memory Stick,
Microdrive SD (Secure Digital), or
(left) MMC (MultiMediaCard)
(middle)
Note: Insert just one card at a time. See your on-screen User's
Guide for supported photo file formats.
4. Push the card in carefully until it stops (it doesn't go in all
the way). When it is in, the card light comes on.
5. Close the memory card door.
After a moment, the printer reads and counts the number of
images on your card. When it's done, your images are
available for printing.

Removing Memory Cards

If your printer is connected to your computer, you need to
eject the memory card from your computer before you remove
the card from the printer, see Printer Basics for instructions on
removing your memory card.
Otherwise, make sure the card light is not flashing, then pull
the card straight out of the slot.
Caution: Do not eject a card while the card light is flashing, or you
may lose data on the card.
SmartMedia or
xD Picture Card
(right)
Card light
8/05
Connecting a Digital Camera or External
Storage Device
If you have one of the following devices, you can connect it
directly to your printer using a USB cable:
❏ Digital camera with PictBridge
™
Print ) support
❏ USB thumb drives (see http://support.epson.com for a list
of compatible drives)
❏ USB CD/DVD burners and drives (see http://
support.epson.com for a list of compatible drives)
❏ 100 or 250MB Iomega Zip drive, AC or USB powered
❏ Memory cards with a commercially available USB adapter
(such as the MicroTech
Note: Epson cannot guarantee the compatibility of any cameras or
drives. If you're not sure about your camera or drive, you can try
connecting it. If it's not compatible, you'll see a screen saying that the
connected device cannot be used.
If you are using a Zip disk or a thumb drive, it must be
formatted as a FAT16 disk. If you insert a Macintosh-
formatted Zip disk or thumb drive, you see an error message
saying that the inserted card cannot be used with the printer.
Tip: When you connect a CD drive, you can also print photos
from Picture CDs that you get from your photo lab.
When you connect a digital camera or storage device, the
printer treats it like a memory card. Follow these steps to
connect it:
1. Remove any memory cards from the printer.
If you leave a card in the printer, images will be read from
the card instead of your camera or storage device.
2. Connect the USB cable from your camera or storage device
to the EXT I/F USB port on the front of the printer. Some
digital cameras require a special USB cable; if so, be sure to
use the one that came with the camera.
Epson Stylus Photo R340
®
or USB DP (USB Direct
™ ™
ZiO! )
Epson Stylus Photo R340 7
-