5
Install software
Your software works with Windows
Windows Vista
®
, and
Windows
1
Make sure the NX110 Series is NOT
CONNECTED to your computer.
Note:
If you see a Found New Hardware
screen, click Cancel and disconnect the
USB cable.
2
Insert the NX110 Series Software CD.
With Windows Vista, if you see the
AutoPlay window, click Run SETUP.EXE.
When you see the User Account Control
screen, click Continue.
3
Click Install and follow the on-screen instructions.
4
When you see the screen below, click the fi rst option and then click
Next, unless the NX110 Series is connected to your computer through an
external print server.
If you're using an external print server, click the second option, click
Next, then skip to step 6.
5
When prompted, connect a USB cable. Use any open USB port on
your computer.
Note:
If installation doesn't continue after a moment, make sure you securely
connected and turned on the NX110 Series.
6
Follow the on-screen instructions to install the rest of the software and
register your NX110 Series.
7
When you're done, remove the CD.
You're ready to print, copy, and scan! See your on-screen Epson Information
Center for instructions.
®
2000, XP, XP Professional x64 Edition,
Mac OS
®
X 10.3.9, 10.4.11, and 10.5.x.