Table of Contents
Advertisement
SETUP MENU
TUNING
BAND
Purpose
Allows for setting the TV channel selector (,tul_er) t o match
your antenna or cable-TV system.
If you are having difficulty tuning channels, the TUNING
BAND may have to be set manually to match your viewing
needs.
NOTE: TUNING BAND can only be used with ANT/
CABLE 1 or 2 Source selection.
AUTO PROGRAM
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO TUNING
SOURCE ID
CLOCK SET
CAPTIONS
]
[
CABLE-CAW
J
Selecting Tuning Band
To Use TUNING
BAND
Press ADJUST
(ADJ) Left/l_,ight to select the
tuning
hallo that
gives you the most channels:
•
BROADCAST--is
used for standard
"over-the-air"
broad-
casts.
•
CABLE
--
CATV
is used for most standard
cable-TV
(CATV) systems.
•
CABLE--
HRC is used for cable-TV
systems that use HRC
(Harmonically
Related
Carrier).
•
CABLE
--
ICC is used for cable-TV
systems
using
ICC
(Incremental
Coherent
Carrier).
Available
Channels
per Band
The channels
that are available
in the broadcast
and cable tun-
ing bands are shown below:
BROADCAST
Band -- VHF 2 to 13, UHF 14 to 69
CATV, HRC and ICC Bands -- 1 to 125
AUTO TUNING
Purpose
Lets your TV compensate for variations in broadcast and
cable-TV frequencies.
_UTOPROGRAM
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO TUNING
SOURCE ID
CLOCK SET
CAPTIONS
] I
FIXED
Selecting Auto Tuning
If you are having difficulty tuning channels, the AUTO TUN-
ING may have to be set manually to match your viewing
needs.
NOTE: AUTO TUNING can only be used with ANT/
CABLE 1 or 2 Source selection.
To Use AUTO TUNING
Press ADJUST (ADJ) Left/Right to select the mode of opera-
tion that gives you the most channels:
•
FIXED is used to receive "over-the-air"
TV stations, and
with many cable-TV systems.
•
SEARCH is used only when the TV must search to find the
frequency being received, such as when used with certain
VCRs and video game controllers.
SOURCE
ID
Purpose
Assigns a descriptive "name" to the input sources. For exam-
ple, the VIDEO 1 source may be named VCR. "VCR" now
appears in the source menu as a reminder that your VCR is
connected to VIDEO 1 input jacks.
To Use SOURCE ID
1.
Press
ADJUST
(ADJ)
Left/Right
to view
the
SOURCE 1D screen.
2.
Use SELECT Up/Down to select a SOURCE.
3.
Use ADJUST (ADJ) Left/Right to select the desired
name for the source.
_UTO PROGRAM
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO TUNING
SOURCE ID
CLOCK SET
CAPTIONS
]
[
LABEL
Selecting Source ID
(continued
on next page)
2_6-o
7 _
3
Advertisement
Table of Contents
