Zenith m-line Operation Manual & Warranty page 35

PIP OPERATION AND CONNECTIONS
Option 2: Antenna or Direct Cable Connection Loop Out
This illustration shows the basic connection of your TV to a
stereo VCR. Using this connection, you are capable of the fol-
lowing operation:
• You may select ANT/CABLE 2 for main picture source to
view channels tuned by the TV's channel selector.
Simultaneously, you may select VIDEO 1 for PIP source to
view -- in the PIP inset m a tape playing in the VCR or
ANT/CABLE 1 to view a different channel tuned by the
VCR's channel selector. (VCR's TV/VCR button must be
set to TV and TV must be tuned to channel 3 or 4.)
Sources may also be swapped: VIDEO I may be the lna._
picture and ANT/CABLE 1 the PIP inset; or ANT/
CABLE 2 may be the main picture and ANT/CABLE 1 thc
PIP inset.
_OJli;c_:tioh From
Antelllia
or Cable-TV System
STEREO VCR
)ANT IN ANT OUT
VIDEO R AUSI _
T
PIP Inset Source
Connected to the VIDEO 1 INjacks
(video andaudio) on back of YV.
LOOP OUT
Option 2: Antenna or Direct Cable Connection Loop Out