Table of Contents
Advertisement
SETUP MENU
CH. (Channel)
ADD/DEL
Purpose
Lets you add channels to and remove channels from the ac-
'five channels found when
using
the AUTO CH. SEARCH
option.
In this way you can customize the channels that are
accessed
through CHANNEL (CH) Up/Down.
CH. ADD/DEL
is an
optional
feature. You do not have to
activate this feature in order
to
use your TV.
Before Using CH. ADD/DEL
Use the AUTO CH. SEARCH
feature, if not previously
used when you first installed the TV.
To Add a Channel to Scan Sequence
1. CH. ADD/DEL
display
should be shown on the TV
if you followed
the "Basic Menu Operation"
given
in the "On-Screen
Menus" section.
ALrI'O CH. SEARCH
-- > CH. ADD/DEL
TUNING
BAND
AUTO
FINE TUNE
CLOCKSET
CAFFIONS
'x_
Selecting Ch. Add/Dei
CH. ADD/DEL
CH 2
ADDED
PRF__ ADJUST
KEY TO CHANGE
Ch. Add/Del Display
2.
Using
CHANNEL
(CH) Up/Down
go to the nearest
channel
ABOVE
the channel
you wish
to add.
NOTE:
AUX channel
will not appear
while using
CH. ADD/DEL.
3. Press SELECT
to go down to the channel
.you wish
to add.
4. Add
channel
by pressing
ADJUST
(ADJ)
Left/Right
until the display shows ADDED.
5. Press ENTER
(ENT) to return to normal TV viewing.
To Delete a Channel from Scan Sequence
1. CH. ADD/DEL
display should be shown on the TV
if you followed
the "Basic Menu Operation"
given
in the "On-Screen
Menus"
section.
2. Using CHANNEL
(CH) Up/Down
go to the channel
you wish to remove.
NOTE:
AUX
channel
cannot
be removed.
3. Remove
channel
by pressing
ADJUST
(ADJ)
Left/Right
until the display
shows DELETED.
4. Press ENTER
(ENT) to return to normal TV viewing.
When Some Channels Can Not Be Tuned
If you have some difficulty tuning some channels, you may
have to manually set the TUNING BAND option. If you
have the correct band, but are still having difficulty finding
a channel you know to be active, set the AUTO FINE
TUNE to SEARCH.
TUNING
BAND
Purpose
Allows for setting the TV tuner to match your antenna or
cable-TV system.
If you are having difficulty tuning channels, the TUNING
BAND may have to be set manually to match your viewing
needs.
Before Using TUNING
BAND
Connect
and turn ON all external
equipment,
such as cable-
TV decoder,
VCR,
etc. Use AUTO
CH. SEARCH
if not
previously
used.
NOTE:
TUNING
BAND
is not displayed
while AUX
chan-
nel is being used.
To Use TUNING
BAND
1. TUNING
BAND
display
should
be shown on the TV
if you followed
the
"Basic
Menu
Operation"
given
in the "On-Screen
Menus"
section.
AUTO CH. SEARCH
CH. ADD/DEL
-- > TUNING
BAND
AUTO
FIN_ TUNE
CLOCK SET
CAPTIONS
J
Selecting Tuning Band
TUNING BAND
BROADCAST
PRESS ADJUST
KEY TO CHANGE
J
Tuning Band Display
2573-A
2. Press
ADJUST
(AD,I)
Left/Right
to select
the
desired
tuning band, as follows:
•
BROADCAST
is used for standard
"over-the-air"
broadcasts.
•
Cable - CATV is used for most standard cable-TV
(CATV) systems.
•
Cable - HRC is used for cable-TV systems that use
HRC (Harmonically
Related Carrier).
•
Cable - ICC is usedl for cable-TV systems using ICC
(Incremental
Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcast
and cable
tuning bands are shown below:
BROADCAST Band
VHF 2 to 13
UHF
14 to 69*
*
Channels above 6!9_xe not selectable.
CATV, HRC and ICC Bands
1 to 125"*
** Channels above 125 may not be selectable.
When Some Channels Are Not Clear
If some channels are not dear: change the AUTO FINE TUNE.
You may have to try different TUNING BAND madAUTO
•FINE TUNE settings until'youget a dear pictaxre, c hannel-to-
channel. Refer to Ihe AUTO iFINE TUNE option for details.
9-2
Advertisement
Table of Contents
