Table of Contents
Advertisement
To turn on or off Recording Timer after its setting
is done
1 Press CLOCK/TIMER
repeatedly until
_=:_c_o_
"REC" appears on the display.
@ (Timer) indicator lights up and the REC
(Recording Timer) indicator starts flashing on the display.
2 To turn off the Recording Timer, press
...........
CANCEL/DEMO.
The REC (Recording Timer) indicator goes off
from the display ("REC OFF" appears on the
display for 2 seconds).
The Recording Timer is canceled, but the setting for the
Recording Timer remains in memory.
Or
To turn on the Recording Timer, press
SET/DISPLAY.
"OK V'" appears on the display for 2 seconds.
The settings you have done are shown on the
display in sequence for your confirmation.
SET/
DISPLAY
%
UsingSleepTimer
With Sleep Timer, you can fall asleepto music. You can set
Sleep Timer only while the unit is turned on.
Timer Priority
Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Below are some examples.
Recording Timer has priority over Daily Timer and Sleep Timer.
• If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
6:00
6:30
7:00
7:30
I
I
I
I
Recording Timer
t
J
I
I
I
I
Daily Timer
I
• If Recording Timer is set to come on while Sleep Timer is
operating, Sleep Timer will be canceled.
21:00
21:30
22:00
22:30
I
I
I
I
Recording Timer
_ [
]
I
"
I
I
I
Sleep Timer
,1_,
, 2
,_
,
canceled.
HowSleepTimer actuallyworks
The unit automatically turns off after the specified time
length passes.
On the remote control
ONLY:
1
Press
SLEEP.
SLEEP
The time length until the shut-offtime
appears and the SLEEP indicator starts
flashing on the display.
• Each time you press the button, the time length changes
as follows:
SLEEP 10 SLEEP 20
SLEEP 30
SLEEP 60
Canceled -,-- SLEEP 120--,- SLEEP 90
2
Wait for about 5 seconds after specifying
the
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time (minute) until the
shut-off time appears for about 5 seconds.
To change
the shut-off
time, press SLEEP repeatedly
until
the desired time length appears
on the display.
To cancel
the setting, press SLEEP
repeatedly
so that the
SLEEP
indicator
goes off.
• Sleep Timer is also canceled
when you turn off the unit.
- 28 -
Advertisement
Table of Contents
