Usingsleeptimer; Timer Priority - JVC MX-GB5 Instructions Manual

4 Set the on-time you want the unit to turn on.
1) Press I_l_l or _a to set the ,:-- ,,
hour, then press SET/DISPLAY. " _d
2) Press I_1_1 or 141_1 to set the Nix
minute, then press SET/DISPLAY.
"OFF TIME" appears for 2
seconds, then the unit enters off-
time setting mode.
Set the off-time you want __'
the unit to turn off (on _-_-- _)\
standby). ,,,. -,
1) Press I_1_1 or 141_1 to set the
' _f_;_
hour, then press SET/DISPLAY. W
2) Press I_1_1 or I_1_1 to set the minute, _[_-_,_
then press SET/DISPLAY.
The trait enters preset station
selecting mode.
Select the preset station .............. ---"
1) Press I_l_l or l-ql_lto select the
band ("TUNER FM" or ,;:-.,
"TUNER AM"), then press
SET/DISPLAY.
2) Press I_1_1 or I_1_1to select a preset =c7_,_,_,==,_
chmmel number, then press SET/
DISPLAY.
The REC (recording timer) indicmor
stops flashing madremains lit. The settings you have done
are shown on the display in sequence for your
confirmation.
7 Press _/I STANDBY/ON to turn
off the unit (on standby) if
necessary.
STANDNY/13N
03/I
_ About the recording source
If you change the source while recording, the recording source also
changes.
Toturn on or off RecordingTimer after its settingis
done
1
2
Press CLOCK/TIMER repeatedly \_
until "REC" appears on the display.
To turn off the Recording Timel;
press CANCEL/DEMO.
The REC (recording timer) indicator
goes off from the display ("OFF" appears for a while).
The Recording Timer is czmceled, but the setting for the
Recording Timer remains in memory until you change it.
To turn on the Recording Timel; press
SET/DISPLAY.
The REC (recording timer) indicator
lights up on the display. The settings you have done are
shown on the display in sequence for your confirmation.
UsingSleepTimer
B'
With Sleep Timer, you can fall asleep to music.
You c_m set Sleep Timer when the unit is turned on.
HowSleep Timer actuallyworks
The unit automatically turns off"after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
SLEEP
The time length until the shut-off time appears %
and the SLEEP indicator starts flashing on the
display.
• Each time you press the button, the time length changes
as follows:
CLEEPIO -- SLEEP20 -- SLEEP30-- SLEEP60 -]
OFF _'-- SLEEP120 _ SLEEP90 - '
(Oanceled)
2 Wait for about 3 seconds after specifying the
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time tmtil the slmt-off time
appears for about 3 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until "OFF"
appears on the display so that the SLEEP indicator goes off
from the display.
• Sleep Timer is also cmaceled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are some examples.
• Recording Timer has priority over Daily Timel:
If Recording Timer is set to come on while Daily Timer is
operating, Daily Timer is canceled and Recording Timer
start working.
AM 6:00 @30 7:00 7:30
I I I I
Recording Timer
I
Daily Timer i[_hcan!eled ,
• If Sleep Timer overlaps with another timer (either Daily
Timer or Recording Timer), a timer with the earlier shut-off
time has priority.
AM6:00 6:30 7:00 7:30
I I I I
Sleep Timer _
Rec°rding Timer I [_L-c!
ncele .
When using the Recording Timer and Sleep Timer at the
same time, pay special attention to the shut-off time.
25