Table of Contents
Advertisement
Switchingto a ProgramTypeofYourChoice
Temporarily
The Enhanced
Other Networks
function
allows the unit to
switch temporarily
to a broadcast
program
of your choice
(TA, NEWS, or INFO) from a different
station.
• The Enhanced
Other Networks
function
only works when
you are listening
to a preset FM RDS stations
providing
the
data.
To activate the Enhanced
Other
Networks
function
REMEMBER
you must preset FM RDS stations to use the
function.
If not yet done, see page 13.
• There is a time limit in doing the following
steps. If the setting
is canceled before you finish, start from step 1 again.
On the remote control
ONLY:
1 Press
TA/NEWS/INFO
until the
data type you want
appears
on the
display.
The selected data type indicator flashes on the
display.
...............
, ¢'i ..........
• Each time you press the button, the data types change as
follows:
TA
_
NEWS
_
INFO_._
I
,,
OFF
_,
(Canceled)
TA:
Traffic announcement
NEWS: News
INFO:
Program the purpose of which is to impart
advice in the widest sense.
OFF:
The function is canceled. The data type indicator
(TA, NEWS, INFO) goes off.
CASE 1
If there is no station
broadcasting
the program
you
have selected
The unit continues
tuning in to the current station.
J
When a station starts broadcasting
the program
you have
selected,
the unit automatically
switches
to the station.
The indicator
of received
PTY code starts flashing.
J
When the program
is over, the unit goes back to the
previously
tuned station,
but the function
still remains
activated.
CASE 2
If there is a station broadcasting
the program
you
have selected
The unit tunes in to the program. The indicator of received
PTY code starts flashing.
J
When the program is over, the unit goes back to the
previously
tuned station,
but the function still remains
activated.
CASE 3
If the FM station you are listening
to is broadcasting
the program
you have selected
The unit continues
to receive the station but the indicator
of received
PTY code starts flashing.
J
When the program
is over, the indicator
of received
PTY
code stops flashing
and remains
lit, but the function still
remains
activated.
2
Wait for about 5 seconds after specifying
the
data type.
The data type indicator stops flashing and remains
lit.
Now, the function is activated. See "How the Enhanced
Other Networks
function
actually works."
_More
about the Enhanced
Other
Networks
function
• The data sent from some stations
may not be compatible
with this
unit. In this case, the function
may not work correctly.
• While listening
to a program
tuned in by the function,
the station
does not change even if another network station starts
broadcasting
a program
of the same data.
• The function
is canceled when you change the source to CD,
TAPE, or AUX, while it is temporarily
canceled when you change
the source
to AM.
• This function
is also canceled
when you turn off the unit.
-15-
Advertisement
Table of Contents
