Usingsleeptimer; Timer Priority - JVC HX-Z30 Instructions Manual

Toturn on or offRecordingTimer after it has been
set
1
Press _ CLOCK/TIMER repeatedly until _)
"REC" appears on the display. CLOCK
/TIMER
The REC (Recording Timer) indicator starts
flashing on the display and the @ (Timer)
indicator remains lit.
2 To turn off the Recording Timer, press CANCEL
CANCEL/DEMO.
/DEMO
The REC (Recording Timer) indicator goes ofl"
from lhe display ("REC OFF" appears on the
display for about 2 seconds).
The Recording Timer is canceled, but the setting for the
Recording Timer remains in memory.
-- Or --
To turn on the Recording Timer, press
SET
SET/DISPLAY. /DISPLAY
"OK/" appears on lhe display for about 2
seconds.
The settings you have clone are shown on the display in
sequence for your confirmation.
UsingSleepTimer
With Sleep Timer, you can fall asleep to music. You can set
Sleep Timer only while the unit is turned on.
HowSleep Timer actuallyworks
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The lime length until the shut-off time
appe_s and the SLEEP indicator starts
flashing on the display.
• Each time you press the button, lhe time length changes
as follows:
SLEEP 10"-_SLEEP 20"_'-SLEEP 30""-SLEEP 601
Canceled -_-- SLEEP 120 -_- SLEEP 90 _
• If the built-in clock has not been set, "CLOCK ADJUST"
appears on the display.
2
Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator flashes slowly until Sleep Timer
activates.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time (minutes) until the
shut-off time appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may womter what
happens if the settings for these timers overlap.
Recording Timer has priority over Daily Timer and Sleep Timer.
Below are some examples.
• If Daily Timer is set to come on while Recording Timer is
operaling, Daily Timer will not come on at all.
AM 6:00 6:30 7:00 7:30
I I I I
Recording Timer [ ]
I I I I
Daily Timer i
I
• If Sleep Timer is set to come on while Recording Timer is
operating, Sleep Timer will not come on at all.
AM 6:00 6:30 7:00 7:30
I I I I
Recording Timer iI _l Ii iI
Sleep Timer ll_._c - 2 i i
anceled.
• If Recording Timer and Daily Timer are set to come on at
the same time, Recording Timer will activate.
AM 6:00 6:30 7:00 7:30
I I I I
Recording Timer _ I
I I I I
Daily Timer ,I
26