Programming The Playingorder Of The Tracks --Program Play - JVC MX-GB5 Instructions Manual

Continued
Programming the PlayingOrder of the Tracks
--Program Play
You can arrange the order in which the tracks play before you
start playing. You can program up to 32 tracks.
• To use Repeat play (see page 19) for Program play, press
REPEAT after starting Program play.
_ layback and recording for Program play are not
available to MP3 discs on this unit
There may be a malfunction ill case that you try to do such playback
or recording.
If a malfunction occurs, unplug the AC power cord and then plug it
back ill.
On the unit ONLY:
1 Load CDs.
• If the current playing source is not the CD player, press
CD ,/11, then • before going to the next step.
2 Press PROGRAM so that PRO_A_
"PROGRAM" appears on the
display.
The PRGM (program) indicator also lights up on the
display.
• All Disc play is selected automatically. You cannot
select One Disc play for Program play.
TRACK .I,*,P,,,P_ff_N,*L
I"-i i--i I--Ii-- I--I 1--1 h,'l
! ! _ I__11__1!_ I ! I !
w_or_! tlNI ALLD,SC
• If a program has been stored in memory, the program is
called up.
CID3
3
Press one of the disc number
buttons (CD1, CD2, and CD3) co2
to select the disc number you _
CD1
N
want to play.
Disc number Program step number
Track number
4 Press
_m,,qor _
to select
the track number, then
press SET/DISPLAY.
Each time you select a track and
press SET/DISPLAY, the selected
track number is added to the track
number indicator.
• You can select up to the 99th track on each disc.
TRACK
I __ ILJ
I I!1
A..P--K.Ca.N-A
Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps 3
and 4.
6 Press CD I_/11. _
%
The tracks are played in the order you have
programmed.
To stop dm'ing play, press l
To exit from Program play, press PROGRAM again before
or after play so that the unit enters All Disc play. (The
program you have made is stored in memory until you turn
off the unit, eject the carrousel, or erase the program.)
• Program play is also canceled when you press CD _.
Tomodify the program
Before playing, you ctm erase the last IC_,NCELa:_EMO
programmed track shown on the display by
pressing CANCEL/DEMO.
• Each time you press the button, the last
programmed track is erased from the program.
To add tracks in the program before play, simply select the
disc numbers and/or track numbers you want to add by
following steps ,3 mad 4 of the programming procedure.
To check the program before play, perfoml the following
procedure:
I Press RANDOM while Program play is stopped.
2 Press I_1_1or }.ql_l.
The programmed tracks appear on the display in the
programmed (or reverse) order.
• Pressing CD I_/ll starts Program play from the first track of
the program.
_ f you want to add tracks in the program after
checking the program
Press PROGRAM twice, then add tracks by following steps 3 and 4
of the programming procedure.
To erase the entire program, press • while Program play is
stopped.
• Turning the power off or ejecting the carrousel will also
erase the stored memory.
lf you try to add another track when 32 tracks are
ah'eady programmed
"FULL" appears on the display and the 32nd track is replaced by the
newly added track,
_ f you have programmed a track from an empty tray,
or a track numher that does not exist on the disc
Such program steps will be skipped.
18