Table of Contents
Advertisement
• The data may not be recorded on the recording medium
correctly. Try recording again.
• Otherwise,
replace the SD card.
19
• To turn the unit on again, set the power/mode
switch to
OFF, and to STANDBY/ON
again.
• Cannot record because the number of file management
folders on either the HDD or SD card has reached the
maximum number. Backup your files to other media, and
then perform the following operations to reset the folder
numbers.
1) Select and set ]FORMAT HDD] (to reset the HDD folder
numbers) or ]FORMAT SD CARD] (to reset the SD card
folder numbers).
2) With ]EXECUTE]
selected,
hold down the DIRECT BACK
UP button and press down the set lever.
3) When [OK] is displayed, press down the set lever to
complete
the process.
Cleaning
Before
cleaning,
turn off the camera
and remove the battery
pack and AC adapter.
• To clean the exterior
Wipe gently with a soft cloth. If the camera
is particularly
dirty, dip the cloth into diluted
mild
soap and wring
it out well before wiping.Then
wipe again with a dry cloth.
• To clean the LCD monitor
Wipe gently with a soft cloth. Be careful
not to damage
the monitor.
• To clean the lens
Wipe gently with lens cleaning
paper.
• Avoid using strong cleaning agents such as benzine or alcohol.
• Mold may form if the lens is left dirty.
• When using a cleaner or chemically
treated cloth, refer to the cautions for each product.
7g
Advertisement
Table of Contents
