Table of Contents
Advertisement
Changing the Menu Settings (Continued)
OFF: The date/time
does not appear.
[AUTO]:The
date/time
appears
for approx.
5 seconds
in
the following
cases.
• When the power/mode
switch is set from OFF to
STANDBY/ON
• When playback starts
ON: The date/time
is always displayed.
EXECUTE:
Performs
this function.
[CANCEL]:
Returns
to the menu screen without
executing
reset.
Adjust
the brightness
of the display
moving
the set lever
to < / >, then press down.
OFF: Disables the function.
[ON]: Activates the function.
To turn the unit on when the drop detection
worked, set the power/mode switch to OFF, and to
STANDBY/ON again.
Setting this function to off increases
the chances
of
damaging
the built-in hard disk if the camera is accidentally
dropped.
[BLUE]
/ RED / GREEN
OFF: The camera
does not receive
the signal
from the
remote
control.
[ON]: Enables
operation
with the remote
control.
OFF: Disables
the function.
[ON]: Activates
the function.
• The demonstration
only works when the AC adapter is
connected,
not with the battery.
• If an SD card is in the camera
demonstration
will not take
place even if this mode is set to [ON].
OFF: Turns off the operation sound.
[MELODY]: The melody sounds when any operation is
performed.
OFF: Unlit.
[ON]: Lit.
7O
Advertisement
Table of Contents
