Dial Prefix; Automatic Daylight Saving Time; Set The Time Zone - Brother MFC-9130CW Quick Setup Manual

12

Dial Prefix

The dial prefix setting will automatically dial a
predefined number before every fax number you dial.
For example: If your phone system requires a 9 to dial
an outside number, this setting will automatically dial
9 for every fax you send.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d
Swipe up or down, or press a or b to display
Dial Prefix.
Press Dial Prefix.
e
Press On.
f
Press Dial Prefix.
g
Enter the prefix number (up to five digits) using
the buttons on the Touchscreen, and then
press OK.
NOTE
• You can use the numbers 0 to 9, and the
characters #, l and !.
• You cannot use ! with any other numbers or
characters.
• If your telephone system requires a timed break
recall (hookflash), press ! on the Touchscreen.
• If the pulse dialing mode is on, # and l are not
available to use. (Canada only)
h
Press .
10
13
Automatic Daylight
Saving Time
You can set the machine to change automatically for
Daylight Saving Time. It will reset itself forward one
hour in the spring and backward one hour in the fall.
a
Press .
b
Press
(Date & Time).
c
Swipe up or down, or press a or b to display
Auto Daylight.
Press Auto Daylight.
d
Press On (or Off).
e
Press .
14

Set the Time Zone

You can set the time zone on the machine for your
location. For example, the time zone for Eastern Time
in the USA and Canada is UTC-05:00.
a
Press .
b
Press
(Date & Time).
c
Swipe up or down, or press a or b to display
Time Zone.
Press Time Zone.
d
Enter your time zone.
Press OK.
e
Press .