Choose Your Wireless Setup Method - Brother MFC-9130CW Quick Setup Manual

For Wireless Network Users
17

Choose your wireless setup method

The following instructions will offer three methods for setting up your Brother
machine on a wireless network. Choose the method you prefer for your
environment.
For methods b and c, start your wireless setup by pressing the
the Touchscreen.
a
Setup using the CD-ROM and temporarily using a USB cable (Windows
We recommend using a computer wirelessly connected to your network for this method.
IMPORTANT
• You need to temporarily use a USB cable during configuration (cable not included).
• If you are using Windows
access point/router, you need to know the SSID (Network Name) and Network Key of your wireless
access point/router before you proceed. Please write down your wireless network settings in the area
below.
• If you need assistance during setup and want to contact Brother Customer Service, make sure you
have your SSID and Network Key ready. We cannot assist you in locating this information.
Item
SSID (Network Name)
Network Key* (Security Key/Encryption Key)
* The Network Key may also be described as the Password, Security Key, or Encryption Key.
NOTE
• If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
• To find this information (SSID and Network Key):
1. Check the documentation provided with your wireless access point/router.
2. The default SSID could be the access point/router manufacturer's name or the model name.
3. If you do not know the security information, please consult the router manufacturer, your system
administrator, or your internet provider.
Now go to
22
®
XP, or using a network cable to connect your computer to your wireless
Record the current wireless network settings
button on
®
and Macintosh)
page 24