Intel SE7505VB2 Specification page 73

Intel® Server Board SE7505VB2
Feature
Reset Configuration Data
Large Disk Access Mode
PS/2 Mouse
Summary Screen
Legacy USB Support
Hyper-Threading
10.1.6.1 I/O Device Configuration Submenu
To access this submenu, select Advanced on the menu bar at the top of the screen and then
I/O Device Configuration.
Main Advanced
I/O Device Configuration
On Board Device
PCI Configuration
Server Menu
Console Redirection
Event Logging
Hardware Monitor
Revision 1.2
Choices Description
• No (default)
Specifies if the extended server configuration data will be reset
during the next boot.
• Yes
Yes clears the extended server configuration data during the next
boot. The system automatically resets this field to No during the
next boot.
• Other
UNIX
be set to Other. If you install an operating system and the hard
• DOS (default)
drive fails to install, change this setting and try again. Different
operating systems require different representations of drive
geometries.
• Disabled
Configures the PS/2 mouse.
• Enabled
Disabled prevents any installed PS/2 mouse from functioning but
frees up IRQ 12.
• Auto Detect
(default) Enabled forces the PS/2 mouse port to be enabled even if a mouse
is not present.
Auto Detect will enable the PS/2 mouse only if one is present.
• Disabled
Enables or disables the boot-time hardware/BIOS summary screen.
• Enabled
(default)
• Disabled
Enables support for legacy USB. It may be necessary to set this
option to Disable to install NetWare 6.0 SP1.
• Enabled
(default)
• Disabled
Allows Intel Xeon processors to run in hyperthreading mode.
Enabling this setting will improve throughput significantly on certain
• Enabled
applications.
(default)
Security
Intel part number C32194-002
† †
, NetWare , and other operating systems require this option
Power Boot
BIOS
System Exit
73