Turning The Power On/Selecting Operation Modes - Panasonic D-snap SV-AV100 Operating Instructions Manual

Turning the Power On/
Selecting Operation Modes
Select a desired mode on the mode selection screen.
1
Set the Power Switch to [ON].
eThe SD Video Camera is turned on.
2
Press the [REC/PLAY] Button to select
Recording Mode or Playback Mode.
®: Recording Mode
@: Playback Mode
3
Press the [MODE] Button to select a
Operation Mode.
• Every time the [MODE] Button is pressed, the
Operation Mode changes as follows.
O: Recording Mode
i_: Playback Mode
• For other notes, see page 79.
2
@ ®
_B DEC ZO Z_4
,About the Operation Modes O
Six operation modes are provided as follows. I
Motion image
[MPEG2]:
I MPEG2
Motion image (MPEG2 format) recording mode
(-) 27) "_
Motion image (MPEG2 format) playback mode J
('_ 29) I MPEG4
Motion image [MPEG4]:
Motion image (MPEG4 format) recording mode
ff
(=')' 28) I PICTURE
Motion image (MPEG4 format) playback mode
I
(-* 30) 41,
Still picture [PICTURE]: I
Still picture (JPEG format still picture)
recording
I MPEG2
mode (-_ 32)
Still picture (JPEG format still picture) playback mode
(-',, 33)
eWhen you use the battery to supply the power with
the SD Video Camera, it is automatically turned off if
you leave it for more than approx. 5 minutes without
any operation.
e
41,
41.
41,
17