Clean Up Function - Panasonic D-snap SV-AV100 Operating Instructions Manual

Clean Up Function
Generally, if you repeatedly write data on a Memory
Card, the data writing speed is decreased by the
characteristic of the Memory Card.
To recover the data writing speed on available SD
Memory Card, [Clean Up] function is installed in this
unit.
When repeating write data on an SD Memory Card, it
may be suddenly stopped while recording MPEG2
motion images. In this case, an error message [Record
Stopped. Clean up in no data area?] appears. Be sure
to use the function. (-_ 73)
[Clean Up] is a function to recover the writing speed on
the free space of the SD Memory Card. It may take
time to finish its process.
eBe sure to clean up the SD Memory Card before
use.
I Press the [REC/PLAY] Button to select
Playback Mode and set the operation
mode.
2 Press the [MENU] Button and select
[Clean Up] on [Card] and press the
[1_ SET] Button.
3 The confirmation screen appears and
then select [YES] and press the [1_ SET]
Button.
eClean up is carried out.
• Even if the [Clean Up] function is performed,
existing data on the card is not erased.
• While card is being cleaned, you should not remove
the Memory Card or turn off the power.
• [Clean Up] function may be unable to activate
according to the kind of card which use. (-_ 27)
1 __
[]
26