Recording Motion Images (Mpeg4) - Panasonic D-snap SV-AV100 Operating Instructions Manual

Recording Motion Images
(MPEG4)
MPEG4 recording provides less visual quality than
MPEG2 recording. It is recommended when long
recording durations are needed. Since the file size is
much smaller than MPEG2, it's ideal if the recording
needs to be sent as an E-mail attachment.
1
Press the [REC/PLAY] Button to select
Recording Mode and set the operation
mode to [MPEG4].
2 Press the [MENU] Button and set [Quality]
on [Record Functions Setup] to desired
picture quality and then press the
[1_ SET] Button.
eSelect one of [S-FINE], [FINE], [NORM], or
[ECOl.
[S-FINE]: Super high image quality 320 × 240
pixels, 15fps
[FINE]: High image quality 320 × 240 pixels,
12fps
[NORM]: Normal image quality 176 × 144 pixels,
12fps
[ECO]: Low image quality 176 × 144 pixels, 6fps
• Press the [MENU] Button after completing the
setting.
3
Press the Recording Start/Stop Button.
• Recording starts and Recording Lamp lights up.
• While recording the motion image, press the
Recording Start/Stop Button to stop recording.
• The sounds recorded will be in monaural.
• For other notes, see page 80.
1 __
MPEG4 Qll
_' OhO0mOOs
_R _hOOm
8 : O0_M
m
MPEG4 • REC
¢_' OhOOmOOs
_R _hOOm
8 : OOPM
28