Selecting The Caller's Recording Time - Panasonic KX-TG2583S Operating Instructions Manual

Preparing the Answering System
Selecting the Caller's Recording Time
You can select "1 minute", "3 minutes" or "Greeting only" for the caller's
recording time. Your phone comes from the factory set to "3 minutes".
Press [FUNCTION/EXIT/CH].
_Save directory ]
Ringer volume
YA
,:Yes]
_Program
_==Yesj
['A
_Save DIRECT# I
Set _ash time
YA ,::Yes
Talk switching
,TAD program
YA _:Yes
Answering
system setting.
See base unit.
Base unit display
Recording time ]
:3min
Base unit display
Recording ti_e
:Greeting only
Press [_ or [_ repeatedly until the arrow
points to "Program".
Press FWD/EDIT[_ (Yes key).
Press @[]or [_] repeatedly until the arrow
points to "TAD program".
Press FWD/EDIT (_ (Yes key).
,,The base unit display shows programming
options.
Press [_].
,,The current setting is displayed on the base
unit.
Press [!], [_] or [_} to select the recording
time.
1:1 minute
2:3 minutes
3: Greeting o_lly
Press FWD/EDIT [_ (Save key).
,,A beep sounds.
,,To return to the standby mode, press [FUNCTION/EXlT/CH].
If you select "Greeting only", the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming
messages. The base unit display will show
"Greeting only"
in the
standby mode but the number of incoming messages will not be
displayed.
24