Panasonic KX-TG2583S Operating Instructions Manual page 76

2.4 ghz cordless answering system
Hide thumbs Also See for KX-TG2583S:
Table of Contents

Advertisement

Before Requesting
Help
Problem
Remedy
You cannot have a
,When the headset is connected (p. 70),
conversation using the
you must use the headset to talk with
handset,
the caller. To have a normal cordless
phone conversation,
disconnect the
headset.
You cannot have a
,Make sure that the headset is connected
conversation
using the
properly (p. 70).
headset.
Answering System
Problem
Remedy
The answering system is on,
but incoming messages are
not recorded.
*The recording time is set to "Greeting
only". Select "1 minute" or "3 minutes"
(p. 24).
,Memory is full. Erase some, or all, of the
messages (p. 59).
You cannot listen to the
,Make sure that the unit is in the standby
recorded messages,
mode.
"Message
full"
flashes
,Memory is full. Erase some, or all, of the
on the base unit display and
messages (p. 59).
the ANSWER ON indicator
flashes rapidly, and no new
messages are recorded.
You cannot operate the
,The handset user is operating the
answering system at the
answering system, or is engaged in an
base unit.
outside call. Wait until "Handset
in
use" disappears.
You cannot operate the
answering system from a
touch tone phone.
*Make sure you enter the correct remote
code.
,The answering system may not respond
if the tones are too short to activate the
unit. Press each button firmly.
*The answering system is off. Turn it on
(p. 65).
?6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tg2583bKx-tg2583w

Table of Contents