Before Requesting Help - Panasonic KX-TG2583S Operating Instructions Manual

2.4 ghz cordless answering system
Hide thumbs Also See for KX-TG2583S:
Table of Contents

Advertisement

Before Requesting Help
Cordless
Telephone
Problem
"No link to base.
Place on cradle
and
try again."is
displayed
and an alarm tone sounds.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
Remedy
While programming
or
searching, the unit starts to
ring and stops the program/
search.
•You are too far from the base unit. Move
closer and try again.
• Place the handset on the base unit and
try again.
• Plug in the AC adaptor.
• Raise the base unit antennas.
• Locate the handsei and the base unit
away from other electrical appliances
(p. 3).
•Move closer to the base unit.
•Raise the base unit antennas.
•Press [FUNCTION/EXlT/CH] to select a
clearer channel.
The handset and/or the base
,The ringer volume is set to OFF. Set to
unit do not ring.
HIGH or LOW (p. 17, 18).
The handset display is
,The handset is in the standby mode
blank.
(p. 9). Press [_], [][], BACK [_[] or
FWD/EDIT []
to turn the display on.
The handset display is still
.Charge the battery fully (p. 11).
blank after pressing [_, [_,
BACK _
or FWD/EDIT [].
You cannot store a name
,You cannot store an item in the directory
and phone number in the
while the unit is in the talk,
directory,
speakerphone or intercom mode, or
while the answering system is in use.
• Do not pause for over 60 seconds while
storing.
• To answer the call, press _
or
[_DIGITALSP-PHONE]. Start again from
the beginning after hanging up.
?4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tg2583bKx-tg2583w

Table of Contents