Table of Contents
Advertisement
Special Features
For Call Waiting Service Users
Press
[FLASH/CALL
WAIT/VOICE
MALL) or [CALL WAfT/FLASH)
if you hear
a call-waiting
tone while talking.
.,The first call is put on hold and you can answer the second call.
• To return to the first caller, press (FLASH/CALL
WAITNOIOE
MAIL) or
(CALL WAfT/FLASH]
again.
,,The call waiting service cannot be used when a parallel connected telephone is
in use.
• If this function does not operate properly, consult your telephone company for
details.
Call Waiting
Caller ID Feature
Call Waiting Caller ID Feature allows your unit
to display the second caller's information. After
you hear a call-waiting tone while talking, the
unit will display the caller's name with the phone
number and"-
--Waiting--
- ".
NANCY
BROWN
ii_000-222-3333
[.... Waiting
.....
*Please contact your telephone company for details and availability in your area.
How to Use the PAUSE Button
(For Analog
PBX Line/Long
Distance
Service Users)
We recommend
you press (_REDIAL/PAUSE]
if a pause
is required
for
dialing
with a PBX or to access
a long distance
service.
Ex.
Line access
number
(_ (PBX)
[_) _
[REDfAL/PAUSE]
"=)' I Phone number]
• Pressing [REDfAL/PAUSE]
once creates a 3.5 second pause. This prevents
misdialing when you redial or dial a stored number.
• Pressing (REDfAL/PAUSE]
more than once increases the length of the pause
between numbers.
Temporary Tone Dialing
(For Rotary or Pulse Service
Users)
Press
_
before entering
access
numbers
which
require tone dialing.
*The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the mode
will return to pulse.
*Access numbers entered after pressing _
will not be included when
redialing.
52
Advertisement
Table of Contents
