Panasonic KX-TG2563S Operating Instructions Manual page 39

1
2
3
4
5
6
7
Press [FUNCTION/EXIT/CH].
While the arrow points to "Save
directory", press FWD/EDIT [] (Yes key).
•The display shows the number of stored items
in the directory.
Enter a name, up to 15 characters using
the dialing buttons (p. 40).
,,To move the cursor, press BACK [] or
FWO/ED_T (3_.
• If a name is not required, press [] (Next key)
and go to step 5.
Press [] (Next key).
Enter a phone number, up to 22 digits.
,*If you misdial, press {INTERCOM/CLEAR].
Digits are erased fromthe right To erase at_
digits, press and hold IINTERCOM/CLEAR].
_Save directory
I
Ringer volume
_A ':Yes
Directory=
20 items
l °
Enter name
<_
T:Next
I °1
Enter name
Tom J onE, s
db
T=Next
Enter phone no.
=Next
0987654321
<'
Press [] (Next key).
,,If you want to change the storing name or
number, press [_ (Edit key) repeatedly to
reach the desired display and change it
Tom Jones
0987654321
A=Edit ,=Save
Tom OoneP
098"7654321
Press FWD/EDIT [_] (Save key).
• A beep sounds.
•To continue storing other items, repeat from step 2
• To return to the standby mode, press
[FU NOTION/EXIT/OH ].
elf a pause is required for dialinq, [REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 52).
,,You can exit the programming mode any time by pressing (FUNCTION/EXlT/CH].
°It the display shows "pit ec:tory ful 1" in step 2, press/,I=UNCTION/EXIT/CHJ.
To erase other stored items from the directory, see page 45.
• After the maximum of 50 items has been stored.
"Directory
fu] 1" is also displayed.
• if 3 beeps sound and the display shows "save ___:_.-_,_", move closer to the base
unit and start again from step 1.