Table of Contents
Advertisement
PICTURE
IN PICTURE
(PIP)OPERA
TION
Picture In Picture (PIP) Operation
This television
includes a two tuner Picture In Picture (PIP) feature.
This allows
watching two (2) live broadcasts
at the same time without or with an external video
source (VCR).
Basic PIP Operation
Procedure
Press the PiP button on the remote control to display the PIP frame onscreen.
Note:
The audio is for the Main Picture only.
1,
Choose channels for the PiP frame by pressing the remote control PIP CHANNEL
up/down buttons,
2,
Choose channels for the Main Picture by pressing the remote control CH up/down
buttons or by using the numeric keypad.
SWAP
Button
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for
onscreen PIP and Main Picturesourcestatus,
PIP Operation with a Cable Box
Procedure
O
To view premium (scrambled) cable channels through your cable box in the Main Picture'.
Note:
Use this procedure if you want to watch premium cable channels in the Main
Picture while viewing a television program or video in the PIP frame.
1.
Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2.
Tune television to Channel 3,
3.
Press the PIP button on the remote control to display the PIP frame onscreen,
Note:
The audio is for the Main Picture only.
4.
Verify the cable box is ON.
5.
Choose channels for the Main Picture by tuning the cable box.
6.
Choose channels for the PiP frame by pressing the TV button on the remote control
and using the PIP CHANNEL
up/down buttons.
Note:
Swap is not available when using the cable box to tune channels. If your cable box has
a video output, it can be connected
to the television
to allow you to use all PIP
functions.
See the equipment manual for more information.
(Tune the PIP to the video
input connected
to the cable box).
im
Advertisement
Table of Contents
