Form Overlay - Kyocera TASKalfa 3500i Operation Manual

Form Overlay

Forms Original
Follow the steps shown below for form overlay.

Form Overlay

Density
Off
Select
Stored Form
Scan
New Form
Original : A4
Zoom : 100%
Paper : A4
Preview
Add Shortcut
Status
Form Overlay - Select Form
Document Box
Box Name
Form for Form Overlay
Custom Box
Status
Copy the original images onto the form. Once you scan
and register the form, the form is overlaid onto the
original. You can also use a form that is already
Density
registered in the machine's memory.
:30%
Copy
NOTE:
To register a form in advance, refer to Form for Form
Overlay on page 7-20 for details.
Density
:100%
1
2
3
Copies
(10 - 30, 100)
%
NOTE:
4 levels from 10%, 20%, 30% or 100%. Press the [+] or
[-] buttons in Density.
None
Select
Form
Cancel OK
10/10/2010 10:10
Copies
Up
Detail
NOTE:
1/1
Preview
Open
Cancel OK
10/10/2010 10:10
4
5
6
4-23
The optional Expansion Memory is required.
Press the Copy key.
Press [Layout/Edit] and then [Form Overlay].
Press [Scan New Form] to use the first page of
originals as a form.
You can select the form density setting through
To use the forms already registered, press [Select
Stored Form]. Press [Select Form] to display the
document boxes that store documents which can
be used as a form. Select the desired form from the
list and press [OK].
To return to a higher level folder, press [Up].
Press [OK].
Place the originals.
Place the original for the form on top of the other
originals. When using the optional document
processor, the first page of the originals should be
placed on the top.
Press the Start key to start copying.
Copying Functions
4