Kyocera TASKalfa 3500i Operation Manual page 313

NOTE:
Refer to page 6-14 for file formats.
Use the procedure below to select the default file format.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default file format.
4
Press [OK].
File Separation
Select the default file separation setting. The available default settings are shown below.
Item
Off
Each Page
NOTE:
Refer to page 6-15 for file separation.
Use the procedure below to select the default file separation.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default for [Off] or [Each Page].
4
Press [OK].
Backgrnd Density (Copy)
Set the default Backgrnd Density (Copy). The available default settings are shown below.
Item
Off
Auto
Manual (Darker 5)
Use the procedure below to select the default Backgrnd Density (Copy).
1
Press the System Menu key.
2
Press [Common Settings], [
(Copy).
3
Select the default Backgrnd Density (Copy).
4
Press [OK].
], [Next] of Function Defaults and then [Change] of File Format.
No file separation performed (all the pages are compiled in one file).
Each scanned page is created into a separate file.
], [Next] of Function Defaults and then [Change] of File Separation.
Do not adjust background density.
Set to auto adjustment.
Set to (Darker 5) in manual adjustment.
], [Next] of Function Defaults, [
9-19
Default Setting (System Menu)
Description
Description
] and then [Change] of Backgrnd Density
9