Kyocera TASKalfa 3500i Operation Manual page 301

Paper Size and Media Type Setup for Multi Purpose Tray (MP Tray Setting)
Select the sizes and media types for the multi purpose tray. Set up frequently-used sizes and media types before
use.
The available paper sizes and media types are shown in the table below.
Item
Paper Auto Automatically detect the paper size. Select Metric or Inch for paper size.
Size
Standard Available options are as follows:
Sizes 1 Inch models: Ledger, Legal, Letter, Letter-R, Statement-R, 12×18", Oficio II,
Executive
Metric models: A3, B4, A4, A4-R, B5, B5-R, A5-R, B6-R, A6-R, Folio, 216×340 mm
Standard Select a standard size except that selected in Standard Sizes 1.
Sizes 2 Inch models: A3, B4, A4, A4-R, B5, B5-R, A5-R, B6-R, A6-R, Folio, 8K, 16K, 16K-R
Metric models: Ledger, Legal, Letter, Letter-R, Statement-R, 12×18", Oficio II,
Executive, 8K, 16K, 16K-R
Others Select special standard sizes or custom sizes*.
ISO B5, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9), Envelope
#6 (Commercial #6 3/4), Envelope Monarch, Envelope DL, Envelope C5, Envelope
C4, Hagaki, Oufuku hagaki, Youkei 4, Youkei 2
Size Enter a size not displayed in the standard sizes.
Entry Inch models:
H: 5.83 to 17.00" (in 0.01" increments)
V: 3.86 to 11.69" (in 0.01" increments)
Metric models:
H: 148 to 432 mm (in 1 mm increments)
V: 98 to 297 mm (in 1 mm increments)
Media Type Plain (105 g/m
Labels, Recycled, Preprint**, Bond, Cardstock, Color, Prepunched**, Letterhead**,
Envelope, Thick (106 g/m
* Refer to Custom Paper Size on page 9-5 for selecting Custom 1- 4 for Custom Paper Size.
** Refer to Media Type Setting on page 9-8 for selecting Custom 1- 8 from Media Type.
To print on preprinted or prepunched paper or on letterhead, refer to Special Paper Action on page 9-11.
NOTE:
To change to a media type other than Plain, refer to Media Type Setting on page 9-8
Use the procedure below to select the paper sizes and media types for manual paper feed.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings, [Next] of MP Tray Setting and then [Change]
of Paper Size.
3
To detect the paper size automatically, press [Auto] and select Metric or Inch for Paper Size.
To select the paper size, press [Standard Sizes 1], [Standard Sizes 2], [Others] or [Size Entry] for Paper Size.
If you select [Size Entry], press [+], [–] to enter X (horizontal) and Y (vertical) dimensions.
Press [# Keys] to enter the paper size using the numeric keys.
4
Press [OK]. The previous screen reappears.
Description
2
or less), Transparency, Rough, Vellum (60 to 105 g/m
2
and more), Coated, High Quality, Custom 1-8**
9-7
Default Setting (System Menu)
2
or less),
9