Changing And Deleting Permit Id No; Setting Send Restriction - Kyocera TASKalfa 2550ci Operation Manual

Changing and Deleting Permit ID No.

FAX - Permit ID List
Register an ID from which faxes will be accepted.
(Up to 25 IDs can be registered.)
FAX ID
12345678
Detail
Status
FAX - Permit ID
Add or edit a Permit ID for transmissions.
Use [-]/[+] or the numeric keys to enter a number.
(0000 - 9999)
Status

Setting Send Restriction

Restrict the other parties to which you send originals only to the ones registered in Permit FAX No. and Permit
ID No. as well as the ones registered in the Address Book. To change the sending restriction, follow the steps
below.
1/1
Add
Delete
Close
12/12/2011 10:10
Cancel OK
12/12/2011 10:10
6-27
1
Follow steps 1 to 2 of Registering Permit ID No. on
page 6-26.
2
Select the Permit ID No. to be changed or deleted.
To change Permit ID No., go to step 3, and to delete
Permit ID No., go to step 6.
3
Press [Detail].
4
Use [+]/[-] or the numeric keys to reenter Permit ID
No. (0000 to 9999)
NOTE:
Press the Clear key to display the previous
number.
5
Press [OK]. When the change confirmation screen
appears, press [Yes]. Go to step 7.
6
Press [Delete]. When the deletion confirmation
screen appears, press [Yes].
7
To change and delete other Permit ID numbers,
repeat step 2 to 6.
8
Press [Close].
1
Press the System Menu key.
2
Press [FAX], [Next] of TX/RX Restriction, and then
[Change] of TX Restriction.
Setup and Registration
6